How to change a strap

HOW TO CHANGE YOUR BREITLING STRAP OR BRACELET

Leather strap change

STEP 1

PLACE YOUR BREITLING WATCH ON A FLAT, SMOOTH SURFACE, LAYING UPSIDE DOWN SO THAT YOU SEE THE CASEBACK.

STEP 2

REMOVE THE PREVIOUS STRAP.

HOLD YOUR BREITLING WATCH FIRMLY AND PLACE THE FORKED END OF THE TOOL BETWEEN ONE OF THE LUGS AND THE STRAP SIDE.

PUSH THE SPRING BAR OUT OF THE LUG HOLE AND REPEAT THE OPERATION TO THE OTHER SIDE.

TIP:
CAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

STEP 3

INSERT THE NEW STRAP BETWEEN THE LUGS.

CHECK THE TABLE TO SEE HOW TO POSITION YOUR NEW BREITLING STRAP DEPENDING ON ITS BUCKLE.

HOLD YOUR BREITLING WATCH FIRMLY AND INSERT MANUALLY ONE PIN OF THE SPRING BAR INTO THE LUG HOLE.

TIP:
USE RELEVANT SPRING BARS FOR STRAP OR BRACELET.

STEP 4

WHILE HOLDING THE SPRING BAR IN POSITION, PUSH BACK THE SECOND PIN OF THE SPRING BAR INTO THE OPPOSITE LUG HOLE USING THE FORKED END OF THE TOOL.

ROTATE YOUR WATCH AND REPEAT THE OPERATION WITH THE SECOND PART OF YOUR BREITLING STRAP.

TIP:
CAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

STEP 5

CHECK THAT YOUR NEW STRAP IS SAFELY FIXED BY SLIGHTLY PULLING ON ITS TWO PARTS.

ENJOY YOUR BREITLING ON ITS NEW STRAP.

	Elegant	Sporty
Tang-Type Buckle			SHORT STRAND PLACED AT 12 O’CLOCK, LONG STRAND PLACED AT 6 O’CLOCK
Double Tang-Type Buckle			SHORT STRAND PLACED AT 12 O’CLOCK, LONG STRAND PLACED AT 6 O’CLOCK
Folding Buckle			SHORT STRAND PLACED AT 6 O’CLOCK / LONG STRAND PLACED AT 12 O’CLOCK
PUSH-BUTTON FOLDING CLASP			PLACE THE PART OF THE STRAP HOLDING THE PUSH-BUTTON PART OF THE FOLDING CLASP AT 12 O’CLOCK.

Metal bracelet change

STEP 1

PLACE YOUR BREITLING WATCH ON A FLAT, SMOOTH SURFACE, LAYING UPSIDE DOWN SO THAT YOU SEE THE CASEBACK.

STEP 2

OPEN THE BUCKLE.

HOLD THE BUCKLE FIRMLY AND PUSH THE PIN OUT OF IT USING THE POINTED TIP OF THE TOOL.

STEP 3

REMOVE THE PREVIOUS BRACELET.

HOLD YOUR BREITLING WATCH FIRMLY AND PLACE THE FORKED END OF THE TOOL BETWEEN ONE OF THE LUGS AND THE BRACELET SIDE.
PUSH THE SPRING BAR OUT OF THE LUG HOLE AND REPEAT THE OPERATION TO THE OTHER SIDE.

TIP:
CAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

STEP 4

INSERT THE NEW STRAP BETWEEN THE LUGS.

CHECK THE TABLE TO SEE HOW TO POSITION YOUR NEW BREITLING STRAP DEPENDING ON ITS BUCKLE.

HOLD YOUR BREITLING WATCH FIRMLY AND INSERT MANUALLY ONE PIN OF THE SPRING BAR INTO THE LUG HOLE.

TIP:
USE RELEVANT SPRING BARS FOR STRAP OR BRACELET.

STEP 5

WHILE HOLDING THE SPRING BAR IN POSITION, PUSH BACK THE SECOND PIN OF THE SPRING BAR INTO THE OPPOSITE LUG HOLE USING THE FORKED END OF THE TOOL.

ROTATE YOUR WATCH AND REPEAT THE OPERATION WITH THE SECOND PART OF YOUR BREITLING STRAP.

TIP:
CAUTIOUS HANDLING WILL AVOID FOR YOU TO SCRATCH THE INNER SIDE OF THE LUG.

STEP 6

CHECK THAT YOUR NEW STRAP IS SAFELY FIXED BY SLIGHTLY PULLING ON ITS TWO PARTS.

ENJOY YOUR BREITLING ON ITS NEW STRAP.

Single-piece watch strap change

STEP 1

TAKE OUT YOUR NEW BREITLING SINGLE-PIECE WATCH STRAP FROM THE BREITLING TRAVEL POUCH.

STEP 2

INSTALL YOUR BREITLING WATCH ON A FLAT, SMOOTH SURFACE AND REMOVE THE CURRENT SINGLE-PIECE WATCH STRAP .

PULL OUT THE SINGLE-PIECE WATCH STRAP FROM THE INTERMEDIARY BUCKLE.

HOLD YOUR BREITLING WATCH FIRMLY AND REMOVE COMPLETELY THE SINGLE-PIECE WATCH STRAP BY SLIDING IT UNDER THE TWO SPRING BARS.

STEP 3

FIT YOUR NEW SINGLE-PIECE WATCH STRAP ON YOUR BREITLING.

PASS THE SINGLE-PIECE WATCH STRAP BETWEEN THE LUGS THROUGH BOTH SPRINGS BARS.

PASS THE SINGLE-PIECE WATCH STRAP THROUGH THE INTERMEDIARY BUCKLE ONCE FITTED BETWEEN THE LUGS THROUGH BOTH SPRING BARS.

IF REQUIRED, ADJUST POSITION ON YOUR WATCH ON THE SINGLE-PIECE WATCH STRAP.

ENJOY YOUR BREITLING ON ITS NEW SINGLE-PIECE WATCH STRAP.